Log Into The Encryption Application - Spectra Logic T-Series Spectra T200 User Manual

Log Into the Encryption Application

1. Log in as a superuser, then select Security > Encryption. The
2. Enter the Encryption password and then select OK. The Encryption
3. Proceed to
December 2008
Encryption User Login screen displays.
Note: No login or password is required the first time you log into the
Encryption application.
Figure 124 The Encryption User Login screen.
Configuration screen displays a list of the current encryption monikers.
Note: If you are configuring encryption for the first time, an encryption
key has not been created, so there is no encryption key moniker
to display.
Figure 125 The initial Encryption Configuration
screen.
Configure the Encryption Initialization Mode and
Configuring Encryption
T200, T380, and T680 Libraries
Password.
205