Importing From Or Exporting To A Specific Location - Spectra Logic T-Series Spectra T200 User Manual

4. Remove the magazine from the TAP.
5. Return the magazine to the open TAP, making sure that it is correctly
6. Manually raise the TAP door until it latches closed.
7. Select either Continue or Stop Exporting.
I F
MPORTING ROM OR
Use the following steps to import media into or export it from a specific
chamber in the library using the TAP. You can only move media packs
(TeraPack magazines or RXT media packs) from the TAP to the storage
pool and vice versa. You cannot import or export individual cartridges.
1. If necessary, place the prepared cartridge(s) you want to import in an
2. From the toolbar menu, select General > Import/Export. The Import/
December 2008
If you are removing the entire magazine of cleaning cartridges from
the cleaning partition and will not be replacing it, skip to
If you are replacing an expended cleaning cartridge with a new one,
exchange the cleaning cartridge in the slot indicated in the feedback
screen for a new one of the same type.
oriented, as shown in
Note: Close the TAP door firmly, but do not use force to close it.
Select Continue if you want to exchange additional magazines. The
library returns the magazine to its original location.
Note:
If you exchanged an expended cleaning cartridge for a new one,
select Ok in response to a message stating that the slot containing
the exchanged cartridge should be empty.
The export process continues automatically as long as there are
magazines left in the cleaning partition. Simply continue to remove
magazines from the TAP and select Continue for each one.
When of the all magazines in the cleaning partition have been
exported or exchanged, the process stops automatically and the user
interface redisplays the Import/Export TeraPack Cases screen.
Select Stop Exporting after you exchange the last cartridge if you do
not want to export all of the cleaning magazines in the cleaning
partition.
E
XPORTING
empty TeraPack magazine.
Export TeraPack Cases screen displays
Note: The General > Import/Export option is only available when
accessing the user interface from the library front panel. It is not
available when accessing the library's user interface through a
remote connection to the RLC.

Importing From or Exporting To a Specific Location

Figure 45 on page 96.
T S
O A PECIFIC
(Figure 47 on page
T200, T380, and T680 Libraries
Step 6.
L
OCATION
101).
109