Configuring Emulation - Spectra Logic T-Series Spectra T200 User Manual

C
ONFIGURING
If your backup software or operating system does not specifically support
the T200, T380, and T680 library or using an Inquiry string of "SPECTRA
PYTHON," you can configure the library to emulate another type of
library. Because most backup applications are certified for one or more of
these libraries, using the emulation mode may allow these applications to
support the library.
Using emulation is not the preferred method of operation and should only be used
Caution
when recommended by SpectraGuard Technical Support.
To define a library emulation, follow these steps:
1. Log in as a user with superuser or administrator privileges.
2. Complete the initial partition configuration screens to reach the Name
3. Select Advanced. The Advanced Partition Settings screen displays.
December 2008
E
MULATION
Note: The following describes an advanced partition configuration
option used only in the context of creating or editing a partition.
The screens for configuring emulation are only accessible after
you complete the initial configuration steps for the partition (see
Enter the Initial Partition Settings on page
To change user types, select Security > Switch User from the toolbar
menu, then log in as a user with the required privileges.
and Media Type screen
Figure 184 Specifying the emulation type.
(Figure 74 on page 141).
T200, T380, and T680 Libraries

Configuring Emulation

141).
271