Spectra Logic T-Series Spectra T200 User Manual page 300

Chapter 13 — Maintaining the Library & Drives
5. Select the source for the firmware update package you want to use:
6. Select Next. The Select Package Type screen displays.
7. Select Next. The Save Library Configuration screen displays.
300
User Guide
Select Local for packages already stored on the library's LCM
compact flash card.
Select USB Key for packages stored on a USB key. There is a brief
delay while the library detects the USB key when you select this
option.
Note: The USB Key option is only available if you previously inserted
the USB key in the USB port on the LCM (see
page 80).
Select Spectra Logic to download a firmware package from Spectra
Logic's server to the LCM compact flash card and then install it.
Note: The Spectra Logic option is only available if the library has a
connection to the internet.
Select a previously configured firmware package server, if you have
one (see Configuring a Firmware Package Server on page
Figure 192 The Select Package Type screen.
Select Library to update the firmware components for the library.
Select Drive only if you have been instructed to update the drive
firmware (see Updating Drive Firmware on page
Figure 193 The Select Package Type screen.
Figure 35 on
193).
311).
91090000