Installing The Software And Restoring The Database - Nortel 1000E Upgrade

Preparing the compact flash card
Procedure 8
Preparing the compact flash card for software delivery to CP PM call
server
1
2
3
4
5
6

Installing the software and restoring the database

The following procedures describe the process of installing the CP PM
software and customer database.
Communication Server 1000E Upgrade
Note: It is recommended to use the 512M RMD provided with the
upgrade kit for this procedure.
Select the correct software load zip file for your platform type (CP PIV or
CP PM) from the software download site.
Download the software load zip file.
Extract all the files to a temporary folder. The following six folders are
listed under the root directory:
temp/
/backup
/install
/keycode
/licenses
/swload
/utilities
Wait for the PC to recognize the new disk media before proceeding. This
may take a couple of seconds.
Navigate to the Utilities directory and double-click the mkbootrmd.bat
file to make the RMD bootable.
Note: Note: The README_BOOTABLE_RMD file provides detailed
instructions on creating a bootable RMD and is located in the utilities
directory of the downloaded software file.
Once the script execution is complete, copy all the folders in the
temporary folder and paste them to the Compact Flash RMD.
Option 11C Chassis to Communication Server 1000E
Installing the software
End of Procedure
Page 91 of 228