Process Overview: Port Configuration - Enterasys N Standalone (NSA) Series Configuration Manual

Process Overview: Port Configuration

Port String Syntax Used in the CLI
4.2 PROCESS OVERVIEW: PORT CONFIGURATION
Use the following steps as a guide to configuringconsole and switch ports on the device:
6. Reviewing and setting console port properties
(Section 4.3.2)
7. Disabling / enabling and naming switch ports
8. Setting switch port speed and duplex mode
9. Enabling / disabling jumbo frame support
10.Setting auto negotiation and advertised ability
11.Setting flow control
12.Configuring link traps and link flap detection
13.Configuring broadcast suppression
14.Setting port mirroring
15.Configuring link aggregation
4-4 Matrix NSA Series Configuration Guide
(Section 4.3.7)
(Section
(Section 4.4.4)
(Section 4.5.4)
(Section 4.3.1)Reviewing switch port status
(Section 4.3.3)
(Section 4.3.4)
(Section 4.3.5)
(Section 4.3.6)
(Section 4.3.8)
4.3.9)