System Configuration; Applicable Systems - Mitsubishi Electric MELSEC Q Series User Manual

2

SYSTEM CONFIGURATION

2 SYSTEM CONFIGURATION

2.1 Applicable Systems

2
2 - 1
This chapter explains the system configuration of the Q62DA-FG.
This section describes the applicable systems.
(1) Applicable modules and base units, and No. of modules
(a) When mounted with a CPU module
For the applicable modules, the number of modules, and base units
applicable to the Q62DA-FG, refer to the user's manual for the CPU module
used.
Note the following when the Q62DA-FG is mounted with a CPU module.
• Depending on the combination with other modules or the number of
mounted modules, power supply capacity may be insufficient. Pay
attention to the power supply capacity before mounting modules, and if
the power supply capacity is insufficient, change the combination of
modules.
• Mount a module within the number of I/O points for the CPU module. If
the number of slots is within the available range, the module can be
mounted on any slot.
REMARK
When the module is used with a C Controller module, refer to the user's manual for
the C Controller module.
(b) Mounting to a MELSECNET/H remote I/O station
For the MELSECNET/H remote I/O station, the number of modules, and
base units applicable to the Q62DA-FG, refer to the Q Corresponding
MELSECNET/H Network System Reference Manual (Remote I/O network).
REMARK
The Basic model QCPU or C Controller module cannot create the
MELSECNET/H remote I/O network.
(2) Support of multiple CPU system
The function version of the Q62DA-FG has been "C" from the first release,
supporting the multiple CPU system.
When using the Q62DA-FG in a multiple CPU system, refer to the following
manual first.
• QCPU User's Manual (Multiple CPU System)
MELSEC-Q
2 - 1