Chapter 5 System Configuration; Applicable Systems - Mitsubishi Electric NZ2GN2S1-16D User Manual

5
SYSTEM CONFIGURATION
This chapter describes system configuration using an I/O module.
For details on the CC-Link IE TSN configuration, refer to the following.
User's manual for the master station used
5.1

Applicable Systems

Applicable master station
When using an I/O module, use the following products as a master station.
Model
RJ71GN11-T2
RD78G64, RD78G32, RD78G16, RD78G8, RD78G4
RD78GHV, RD78GHW
The above information of "applicable master station" is information at the time of this manual's issuance.
For the latest information, refer to the CC-Link Partner Association's homepage.
www.cc-link.org
Compatible software version
For the compatible software version, always keep the engineering tool of the master station up to date.
Only GX Works3 is a compatible engineering tool.
When the latest software is necessary, please consult your local Mitsubishi representative.
Compatible software package
GX Works3 is required to diagnose the I/O module.
Install GX Works3 with the following version according to the I/O module used.
Model
NZ2GN2S1-32D, NZ2GN2B1-32D, NZ2GN2S1-32T, NZ2GN2B1-32T, NZ2GN2S1-32TE,
NZ2GN2B1-32TE, NZ2GN2S1-32DT, NZ2GN2B1-32DT, NZ2GN2S1-32DTE, NZ2GN2B1-32DTE
NZ2GNCF1-32D, NZ2GNCE3-32D, NZ2GNCF1-32T, NZ2GNCE3-32DT
NZ2GN2S1-16D, NZ2GN2B1-16D, NZ2GN12A4-16D, NZ2GN12A4-16DE, NZ2GN2S1-16T,
NZ2GN2B1-16T, NZ2GN12A2-16T, NZ2GN2S1-16TE, NZ2GN2B1-16TE, NZ2GN12A2-16TE,
NZ2GN12A42-16DT, NZ2GN12A42-16DTE
Firmware version
No restriction
"05" or later
Software version
Version 1.055H or later
Version 1.065T or later
Version 1.075D or later
5 SYSTEM CONFIGURATION
111
5.1 Applicable Systems
5