V100 E5
•
If the tension is correct, tighten the lock
nut of the adjuster screw.
•
Otherwise, repeat the operations for
the belt tensioning.
•
When the correct belt tension frequen-
cy is reached, install the RH head sup-
port bracket.
•
Install the three fixing screws and tight-
en them to the specified torque.
Locking torques (N*m)
Head mounting bracket fixing screw
(36.88 ± 5.53 lb ft)
•
Fit the cover of the belt on alternator.
50 ± 7.5 Nm
Electrical system
ELE SYS - 97