MOTO GUZZI V100 E5 2023 Service Station Manual page 233

V100 E5
Insert and tighten the valve retaining nut (2) to the
prescribed torque.
Locking torques (N*m)
Valve retaining nut
4.7 ± 0.25 Nm (3.47 ± 0.18 lb ft)
Install and tighten to the prescribed torque the
screw (1) that fastens the TPMS sensor to the
valve.
Locking torques (N*m)
Sensor retaining screw
ft)
Reassemble the tyre using a tyre changer.
Lubricate the edges of the tyre with grease to aid
insertion into the seat.
Once the tire has been inserted in its seat, inflate
the tyre to the following pressure:
Rear tyre: 2.8 bar (280 KPa) (40.61 PSI).
Front tyre: 2.5 bar (250 KPa) (36.26 PSI).
Once the wheels have been reassembled on the vehicle, the following operations are required using
the P.A.D.S. diagnostic tool.
•
Connect the P.A.D. S. to the vehicle and find the model "V100 Mandello";
•
select the section "TYRE PRESSURE MONITORING - TPMS"
1.3 ± 0.05 Nm (0.96 ± 0.037 lb
Chassis
CHAS - 233