V100 E5
•
Insert the inner spacer the wheel hub,
and repeat the insertion of the bearing
on the opposite side.
•
Insert the dust seal (13) and bring it
flush with the wheel hub.
•
Repeat the operation for the dust seal
on the opposite side.
INSTALLATION OF EXTERNAL WHEEL COM-
PONENTS
•
Install the left brake disc (12) on the
rim.
•
Gradually screw in the six attachment
screws (11) following the sequence A-
B-C-D-E-F and tighten them to the
specified torque.
Locking torques (N*m)
Brake disc fixing screw
ft)
•
Working on the opposite side, fit the
brake disc right (10) and the tone wheel
(9) on the rim.
•
Gradually screw in the six attachment
screws (8) following the sequence A-B-
C-D-E-F and tighten them to the speci-
fied torque.
Locking torques (N*m)
Brake disc fixing screw
ft)
•
Fit the spacer (7) on the right side of
the wheel.
30 ± 4.5 Nm (22.13 ± 3.32 lb
30 ± 4.5 Nm (22.13 ± 3.32 lb
Chassis
CHAS - 243