Chassis
•
Remove the screw and its fixing lock
nut used to fasten the terminal to the
frame.
During refitting, tighten the fixing screw to the pre-
scribed torque.
Locking torques (N*m)
Support bracket terminal fastener
ft)
•
Remove the exhaust terminal from the
vehicle.
Removing the exhaust manifold
EXHAUST MANIFOLD HEAT SHIELD
Unscrew the lower fixing screw of the heat shield.
NOTE
THESE OPERATIONS ARE ALSO VALID FOR THE HEAT
SHIELD ON THE OPPOSITE SIDE.
Unscrew the upper calmp located inside the heat
shield.
CHAS - 278
25 Nm (18.44 lbf
V100 E5