Maintenance
•
Tighten the fixing screws to the speci-
fied torque, following the sequence A-
B-C-D-E-F-G-H- I.
Locking torques (N*m)
Camshaft support screw
NOTE
The screw (6) in the hole of the spark plug has a washer,
while the screw (7) is the single shorter screw compared
to the others.
•
Remove the special tool (1) from the
camshafts.
•
Remove the pin from the pinion of the
crankshaft.
•
Refit the cover valves, spark plug, tim-
ing system cover and the radiator.
•
Restore the water level in the radiator
and in the expansion tank.
MAIN - 80
11-13 Nm (8.11 - 9.59 lbf ft)
V100 E5