Braking system
•
Remove the lateral fastener screw (4).
•
Remove the ABS modulator from its
seat.
•
Press the safety tab and push the con-
nector locking lever (5) forward.
•
Disconnect the modulator connector.
•
Remove the modulator from the vehi-
cle.
INSTALLATION
•
Install the new modulator unit, complete with ABS control unit, completely pre-filled with
brake fluid and with the connection mounting holes closed with protective plugs
•
To keep the brake fluid in the ABS control unit, first remove the protective plugs from the
feed holes to the brake callipers, then connect the corresponding pipes
BRAK SYS - 286
V100 E5