MOTO GUZZI V100 E5 2023 Service Station Manual page 311

V100 E5
•
Check the brake lever stroke and that
the pressure does not feel "spongy".
Otherwise, it means that there is air in
the circuit and it must be bled.
•
Once the operations are finished, re-
place the rubber cap on the bleeding
valve.
•
Top up the tank with brake fluid to the
correct level.
•
Replace the protective rubber and the
tank cap and tighten the fixing screws.
Rear brake circuit
•
Unscrew the cap (1) of the rear brake
fluid tank.
Braking system
BRAK SYS - 311