MOTO GUZZI V100 E5 2023 Service Station Manual page 136

Electrical system
1. Earth.
2. Intake air temperature signal.
3. Pressure sensor power supply.
4. Intake air pressure signal.
(3) 11MP ECU
Engine temperature sensor
ENGINE OIL TEMPERATURE SENSOR
Function
It is used to inform the ECU regarding the engine
oil temperature in order to optimize parameter
management.
Operation / Operating principle
NTC type sensor (resistance sensor, inversely
variable with temperature).
Level in electrical circuit diagram:Temperature
sensors
Position:
•
Sensor: inside the "V" of the engine, on
the front side, under the thermostatic
valve
•
Connector: on the sensor
Technical Characteristics
•
Electrical resistance at 25 °C: 5000
Ohm
•
Maximum temperature: 170°C
•
Maximum temperature attainable for
short periods: 185°C
Key
(1) Engine oil temperature sensor
1. Signal.
2. Earth.
(2) 11MP ECU
ELE SYS - 136
V100 E5