V100 E5
•
Loosen the cable gland clamp from the
fork stanchion.
•
Loosen the screw (2) of the upper
steering plate.
During refitting, tighten the screw to the prescribed
torque.
Locking torques (N*m)
Upper steering plate screw
lbf ft)
•
Support the fork stanchion and loosen
the two screws (3) of the lower steering
plate.
During refitting, tighten the screws to the prescri-
bed torque.
Locking torques (N*m)
Lower steering plate screw
lbf ft)
•
Slide off the stanchion downward and
remove it from the vehicle.
•
Repeat the operation for the stem on
the opposite side.
25 ± 2.5 Nm (18.44 ± 1.84
25 ± 2.5 Nm (18.44 ± 1.84
Suspensions
SUSP - 185