MOTO GUZZI V100 E5 2023 Service Station Manual page 403

V100 E5
ONCE REMOVED, THE BATTERY MUST BE PUT AWAY IN
A SAFE PLACE OUT OF THE REACH OF CHILDREN.
INSTALLATION
•
Follow the removal procedure in reverse order; be careful to FIRST CONNECT THE POS-
ITIVE CABLE (+) and then the negative cable (-).
Tail guard
REAR FAIRINGS REMOVAL
•
First remove the passenger saddle, the
rider saddle and the rear handle.
•
Remove the two upper fixing screws.
•
Remove the lower fastening screw.
•
Pull outward the front part of the fairing
and bring it toward the tank to release
it from the support then remove it from
the vehicle.
Bodywork
BODYW - 403