MOTO GUZZI V100 E5 2023 Service Station Manual page 299

V100 E5
•
Install the external pad (4) in the cal-
liper, making sure that the support arm
is facing the upper part.
•
Install the spring (3) in the calliper.
•
Insert the fixing pin (2) in the calliper,
ensuring that it passes over the spring
and that it is correctly inserted pad
bushes.
•
Once correctly inserted, tighten it firm-
ly.
•
Insert the cotter pin (1) on the pin.
•
When installation is complete, press
the brake lever several times to release
the pistons from the calliper and bring
the pads into position.
Rear brake pads
Braking system
BRAK SYS - 299