MOTO GUZZI V100 E5 2023 Service Station Manual page 322

Braking system
•
Remove the connector from the mod-
ulator and collect the sealing washers.
DURING REFITTING, USE NEW SEALING WASHERS.
•
Release the rigid pipe from the lower
clip (1) used to fasten it to the frame.
•
Release the rigid pipe from the upper
clip (2) used to fasten it to the frame,
located next to the throttle bodies.
•
Remove the brake pipe from the vehi-
cle, pulling it upward, as shown in the
figure.
BRAK SYS - 322
V100 E5