MOTO GUZZI V100 E5 2023 Service Station Manual page 144

Electrical system
In fact, the throttle valve correction starts operating when the lambda probe check starts. From the
throttle correction value it is possible to determine whether the engine has ventilation problems (in the
case of corrections during closure) or fouled bodies (in the case of corrections during).
A negative correction
•
A leakage of air,
•
Poor sealing of exhaust valves,
•
Timing system error.
A positive correction
by:
•
dirty and fouled throttle bodies.
Engine oil pressure sensor
ENGINE OIL PRESSURE SENSOR
Function
Indicates the instrument cluster if there is enough
oil pressure 0.33 bar (4.8 PSI) in the engine.
Operation / Operating principle
Switch normally open. With oil pressure lower than
0.33 bar (4.8 PSI), closed circuit.
Level in electrical circuit diagram
Low fuel and oil pressure.
Position
•
Sensor: on the crankcase, under the
left head.
•
Connector: on the sensor.
Electrical specifications
•
Engine off: closed circuit (continuity).
•
With engine started: open circuit (infin-
ite resistance).
Key
1. Oil pressure sensor.
2. 11MP ECU
ELE SYS - 144
- 0.6 ° indicates low vacuum in the manifold, which may be generated by:
+ 0.6 ° indicates too much vacuum in the manifold, which may be generated
V100 E5