V100 E5
•
Unscrew the upper fixing screw (5) and
the relative lock nut and retrieve the
two T-bushings.
During refitting, tighten the nut to the prescribed
torque.
Locking torques (N*m)
Upper fixing screw (5)
•
Unscrew the upper fixing screw (6) and
the relative lock nut and retrieve the
two T-bushings.
During refitting, tighten the nut to the prescribed
torque.
Locking torques (N*m)
Lower fixing screw (6)
•
Remove the instrument panel support
from the vehicle, sliding the wiring har-
nesses inside it.
Battery
•
Make sure the ignition switch is set to
"KEY OFF";
•
Remove the rider saddle;
•
Disconnect the connector (1) of the
OBD2 socket;
•
Remove the cable (2) of the GMP pro-
vision, moving it forward to release it
from its support;
10 Nm (7.38 lbf ft)
10 Nm (7.38 lbf ft)
Bodywork
BODYW - 401