MOTO GUZZI V100 E5 2023 Service Station Manual page 359

V100 E5
•
Install the plate (3), taking care to insert
the centring holes in the relative guides
on the fairing.
•
Install the fastening clips of the pawl.
•
Install the spring on the pawl, taking
care to insert the lower pin in its seat
on the pawl.
•
Insert the upper pin of the spring in the
corresponding hole on the lever.
•
Turn the lever to preload the spring and
then insert the lever into its seat on the
pawl.
Bodywork
BODYW - 359