MOTO GUZZI V100 E5 2023 Service Station Manual page 273

V100 E5
Remove the supplied flange with the specific tool
from the sprocket hub.
Installing
•
Install the bevel gear on the swingarm,
taking care to properly insert the car-
dan shaft in its splines.
•
Insert the two lower fixing screws (4)
and tighten them to the prescribed tor-
que.
Locking torques (N*m)
Bevel gear fixing screw
ft)
•
Insert the upper fixing screw (3) and
tighten it to the prescribed torque.
Locking torques (N*m)
Bevel gear fixing screw
ft)
45 ± 6.5 Nm (33.19 ± 4.79 lb
45 ± 6.5 Nm (33.19 ± 4.79 lb
Chassis
CHAS - 273