MOTO GUZZI V100 E5 2023 Service Station Manual page 190

Suspensions
•
After removing the locking plate and
the device used to compress the
spring, remove the upper plate (7) and
the pre-loading pipe (3).
•
Remove the spring (8) allowing the oil
inside the stem to drip out.
•
Drain the oil into a container having
sufficient capacity, extending the stan-
chion several times in order to ensure
the oil is drained completely.
DO NOT DISPOSE OF OIL IN THE ENVIRONMENT.
DISPOSE OF ENGINE OIL IN A SEALED CONTAINER AND
TAKE IT TO YOUR SUPPLIER OR TO THE NEAREST USED
OIL COLLECTION CENTRE.
•
Taking care not to damage it, secure
the sleeve horizontally in a vice, using
the appropriate protection devices.
•
Extract the dust guard (9).
Specific tooling
AP8140149 Guard for assembly operations
SUSP - 190
V100 E5