Suspensions
•
Insert the cap (9) and tighten it as far
as it will go.
CAUTION
CHECK THE O-RING PRESENT ON THE FILLING CAP AND
REPLACE IF DAMAGED.
•
Ensure that the cap cannot rotate, and
then tighten the nut.
•
Tighten the cap on the sleeve, applying
the pre-defined torque.
V100 Mandello S
NOTE
THE FOLLOWING OPERATIONS ARE FOR OHLINS FORKS WITH ELECTRONIC ADJUSTMENTS.
•
Install the following components on the
wheel holder stanchion (1) in the order
given: dust gaiter (3), retainer ring (4)
and oil seal (5).
SUSP - 204
V100 E5