Chassis
Operate the press in order to disassemble the
case cover from the sprocket hub.
WARNING
NOTE
BEFORE USING THE PRESS TO DISASSEMBLE THE
SPROCKET HUB FROM THE COVER, IT IS RECOMMEN-
DED THAT THE INVOLVED AREA BE HEATED WITH AN
AIR HEATER IN ORDER TO FACILITATE DECOUPLING.
Remove the sealing ring from the gearbox cover.
Remove the gearbox from the specific tool and the
vice.
Remove the sealing ring from the case by tapping
with a suitable punch.
Using the specific tool, remove the roller bearing
from the gearbox.
Specific tooling
021068Y Ring gear side roller cage extraction
punch
CHAS - 264
V100 E5