MOTO GUZZI V100 E5 2023 Service Station Manual page 149

V100 E5
•
(1) The PURGE valve: under the bat-
tery compartment, fixed to the canister
support.
•
(2) Secondary air valve: Under the bat-
tery compartment, on the right side of
the vehicle.
•
Connectors: On the relative valves.
Electrical specifications:
PURGE valve electrical resistance at 20 °C: 24 ±
3 Ohm
Secondary air valve electrical resistance at 20 °C:
21.5 Ohm
Key
(1) PURGE valve
1. Power supply +Vbatt
2. Ground
(2) Secondary air valve
1. Power supply +Vbatt
2. Ground
(3) 11MP ECU
(4) Fuse
(5) Injection relay
(6) Battery
CAUTION
BEFORE CARRYING OUT ANY TROUBLESHOOTING,
CAREFULLY READ THE GENERAL TROUBLESHOOTING
CONCEPTS FOR ELECTRICAL DEVICES AT THE BEGIN-
NING OF THE CHECK AND CONTROL SECTION IN THE
ELECTRICAL SYSTEM CHAPTER.
Quick shift
Function:
To indicate to the control unit the request for as-
sisted gear shift.
Operation / Operating principle:
Two normally open switches that are closed to
ground when the shift lever is operated (both at
upshift and downshift).
Electrical system
ELE SYS - 149