MOTO GUZZI V100 E5 2023 Service Station Manual page 242

Chassis
WHEEL AXLE
•
Use a dial gauge to measure the ec-
centricity of the wheel axle. Replace
the wheel axle if the eccentricity meas-
ured exceeds the specified limit.
Characteristic
Maximum eccentricity:
0.25 mm (0.0098 in)
•
Use a dial gauge to check that the ra-
dial (A) and axial (B) eccentricity of the
wheel do not exceed the specified lim-
its. Excessive eccentricity is usually
caused by worn or damaged bearings.
If eccentricity is not within the indicated
limits after replacing the bearings, re-
place the wheel.
Characteristic
Maximum radial and axial eccentricity:
0.8 mm (0.031 in)
Installing
INSTALLATION OF INTERNAL WHEEL COM-
PONENTS
•
Insert the bearing into the wheel hub
and bring it to the stop using the special
equipment.
Specific tooling
020359Y 42 x 47 mm Adaptor
020376Y Adaptor handle
CHAS - 242
V100 E5