MOTO GUZZI V100 E5 2023 Service Station Manual page 314

Braking system
•
Top up the tank with brake fluid to the
correct level.
•
Replace the protective rubber and
screw the tank cap back on.
Front brake pump
Removal
•
Place a container under the pump to
collect the brake fluid.
•
Remove the union screw from the pipe.
•
Retrieve the two sealing washers.
DURING REFITTING, USE NEW SEALING WASHERS.
•
Remove the two fixing screws from the
front brake master cylinder.
During refitting, tighten the screws to the prescri-
bed torque.
Locking torques (N*m)
Screw fastening front brake master cylinder
Nm (7.38 lbf ft)
BRAK SYS - 314
10
V100 E5