MOTO GUZZI V100 E5 2023 Service Station Manual page 371

V100 E5
•
Remove the fastening plate (3) from
the anti-slip rubber (2).
NOTE
The left rubbers are marked with "L" and the right with "R"
and can be fitted both for the rider and for the passenger.
Side body panels
REMOVAL
The operations described below refer to the left
side fairing, but are valid for the right side fairing
as well, excluding the operations concerning the
saddle lock.
•
First remove the rider saddle.
•
Remove the two expansion caps.
•
Release the fairing from the tank mov-
ing it toward the rear of the vehicle.
•
Release the saddle opening cable from
the support, by lifting it up.
Bodywork
BODYW - 371