MOTO GUZZI V100 E5 2023 Service Station Manual page 237

V100 E5
Removal
REMOVAL
To remove the front wheel, install a workshop
stand to the rear wheel and place a pantograph
jack under the engine to lift the front wheel off the
ground. Check the stability of the vehicle.
To avoid damaging the vehicle, place a protection between
the jack and the sump oil.
•
First remove the front mudguard.
•
Release the ABS sensor cable from
the 4 retainers of the brake pipe.
•
Remove the two fixing screws (1) and
remove the brake calliper (2) from the
vehicle; repeat for the opposite side.
•
Remove the plastic clamp (3).
Chassis
CHAS - 237