MOTO GUZZI V100 E5 2023 Service Station Manual page 275

V100 E5
Pos. Description
1 Nut for fastening the stand to the
stand plate
2 Stand switch lock pin
3 Pin fastening the spring to the stand
plate
4 Pin fastening the spring to the stand
5 Stand switch fixing nut
6 Stand sensor cable guard fixing
screws
7 Screws fastening the stand plate to
the engine crankcase
Side stand
REMOVAL
•
First remove the left rider footrest plate.
•
Remove the two fixing screws and re-
move the protection of the stand
switch.
•
Cut the plastic clamp.
•
Remove the nut (1).
•
Remove the switch from the side
stand.
S
TAND
Type Quantity
M8 1 25 ± 3.5 Nm (18.44 ±
M6 1 10 ± 2 Nm (7.38 ± 1.48
M8 1 25 ± 5 Nm (18.44 ± 3.69
M6 1 10 ± 2 Nm (7.38 ± 1.48
M6 1 10 ± 2 Nm (7.38 ± 1.48
M5 2 5.5 ± 1 Nm (4.06 ± 0.74
M8 2 25 ± 3.5 Nm (18.44 ±
Torque Notes
-
2.58 lb ft)
Pre-applied Loct.
lb ft) 243
Pre-applied Loct.
lb ft) 243
-
lb ft)
-
lb ft)
Pre-applied Loct.
lb ft) 243
-
2.58 lb ft)
CHAS - 275
Chassis