MOTO GUZZI V100 E5 2023 Service Station Manual page 328

Clutch system
•
Remove the two pipe grommets from
the left beam of the frame.
•
Pass the clutch pipe between the en-
gine and the frame, as illustrated in the
figure.
•
Remove the clutch pipe from the vehi-
cle, pulling it upward, as shown in the
figure.
During refitting, make sure you pass the clutch pipe be-
tween the frame and the conduit of the electric system, as
shown in the figure.
FITTING
To refit, follow the removal procedures in reverse, bleeding the system after assembly is complete.
CLU SYS - 328
V100 E5