V100 E5
•
Remove the lower steering plate.
•
Using a generic bearing extractor, re-
move the outside seat of the upper
steering bearing.
•
Using a generic bearing extractor, re-
move the outside seat of the lower
steering bearing.
•
Remove the inner ring (1), together
with the balls, of the lower bearing from
the steering headstock pipe.
•
Using a workshop heating gun, heat
the internal seat (2) of the bearing and
then remove it from steering headstock
pipe.
•
Retrieve the dust seal ring (3).
Assembling
•
Working on the bench, pre-fit on the
steering headstock pipe the dust seal
ring (3), the internal seat (2) and the
inner ring (3) with the balls of the lower
steering bearing.
Lubricate the inserted seat with grease for bearings.
Suspensions
SUSP - 217