MOTO GUZZI V100 E5 2023 Service Station Manual page 195

V100 E5
•
Remove the wheel holder shaft (1) and
the sleeve (2).
•
Clamp the sleeve in a vice and, by lev-
ering it alternately at various points,
remove the anti-dust seal (3) from the
sleeve (2).
•
Remove the retaining ring (4).
•
Remove the shaft seal (5) by levering
it alternately at various points.
CAUTION
PROTECT THE EDGE OF THE SLEEVE IN ORDER TO
AVOID RUINING IT WHILE REMOVING THE SHAFT SEAL
(5).
Replace the following components with new ones:
- shaft seal (5)
- anti-dust seal (3)
CAUTION
Suspensions
SUSP - 195