MOTO GUZZI V100 E5 2023 Service Station Manual page 189

V100 E5
•
Using the special tool (2), fastened to
the pre-loading pipe (3), compress the
spring and, with the assistance of a
second operator, insert the separator
plate (4) under the cap retaining nut
(5).
Specific tooling
020888Y Pre-load tube clamp
AP8140148 Plunger-spacer separator plate
•
Ensure that the cap (1) cannot rotate,
and then loosen the nut (5).
•
Unscrew and remove the cap (1).
•
Extract the shaft (6) and remove it.
Suspensions
SUSP - 189