MOTO GUZZI V100 E5 2023 Service Station Manual page 301

V100 E5
•
Remove the internal brake pad (4) from
the calliper.
Installing
•
Insert the internal pad (4) in the calliper
and lock it in position by inserting the
pin (2) in the relative eyelet of the pad.
CAUTION
ALWAYS REPLACE BOTH PADS AND MAKE SURE THEY
ARE CORRECTLY POSITIONED INSIDE THE CALLIPER.
•
Insert the external pad (3) in the brake
calliper and insert completely the pin
(2), bringing it to the end with the brake
calliper.
•
Insert the two cotter pins (1) on the pin.
•
When installation is complete, press
the brake lever several times to release
the pistons from the calliper and bring
the pads into position.
Braking system
BRAK SYS - 301