MOTO GUZZI V100 E5 2023 Service Station Manual page 146

Electrical system
Clutch lever sensor
Function
Indicates the clutch lever position to the control
unit.
Operation / Operating principle
If a gear is engaged but the clutch is engaged,
meaning with the circuit closed to ground, there is
consent to start the vehicle.
Level in electrical circuit diagram:
Start enable switches
Position:
•
Switch: under the clutch lever.
Electrical specifications:
•
Clutch lever pulled: closed circuit (con-
tinuity)
•
Clutch lever released: open circuit (in-
finite resistance).
CAUTION
BEFORE CARRYING OUT ANY TROUBLESHOOTING,
CAREFULLY READ THE GENERAL TROUBLESHOOTING
CONCEPTS FOR ELECTRICAL DEVICES AT THE BEGIN-
NING OF THE CHECK AND CONTROL SECTION IN THE
ELECTRICAL SYSTEM CHAPTER.
Key:
(1) Clutch lever switch.
•
(A) Lever pulled.
•
(B) Lever released.
(2) Rear brake lever switch.
•
(A) Lever pulled.
•
(B) Lever released.
(3) 11MP ECU.
NOTE
The front brake switch is not provided. Operation of the
front brake lever results in pressure changes detected by
the ABS control unit pressure sensor which, via CAN,
communicates with the 11 MP control unit.
ELE SYS - 146
V100 E5