Braking system
•
Unscrew the connector from the brake
calliper.
•
Remove the connector from the front
brake calliper and collect the three
sealing washers.
NOTE
DURING REASSEMBLY, THE PIPE FROM THE MODULA-
TOR (2) GOES OVER THE CALLIPER COMMUNICATING
PIPE (3).
DURING REFITTING, USE NEW SEALING WASHERS.
•
Unscrew the connector from the front
left brake calliper.
•
Remove the connector from the front
left brake calliper and collect the three
sealing washers.
DURING REFITTING, USE NEW SEALING WASHERS.
BRAK SYS - 320
V100 E5