V100 E5
Removing the clutch master cylinder
CLUTCH PIPE
REMOVAL
•
Drain the fluid completely from the
clutch control circuit.
•
Unscrew the coupling of the clutch
master cylinder.
•
Remove the connector from the clutch
master cylinder and collect the sealing
washers.
DURING REFITTING, USE NEW SEALING WASHERS.
•
Unscrew the control cylinder connec-
tor.
•
Remove the connector from the clutch
control cylinder and collect the sealing
washers.
DURING REFITTING, USE NEW SEALING WASHERS.
Clutch system
CLU SYS - 327