V100 E5
•
Using a dedicated wrench, unscrew
the spark plug and remove it from the
head.
•
Check the state of wear of the spark
plug and measure the distance be-
tween the electrodes.
•
If the value does not lie within the
specified value, replace the spark plug
with a new one.
Characteristic
Spark plug electrode gap
0.7 mm (0.028 in)
Transmission fluid
Replacement
CAUTION
THE UNIT MUST BE HOT WHEN THE OIL IS CHANGED AS UNDER SUCH CONDITIONS OIL IS
FLUID AND THEREFORE EASY TO DRAIN.
NOTE
RIDE SOME km (miles) TO WARM UP ENGINE OIL
Place a suitable container with a capacity greater
than 250 cc (15.26 cu in) under the drain plug (1).
Maintenance
MAIN - 63