Suspensions
THE FOLLOWING OPERATIONS APPLY WHEN
MOUNTING THE LEFT HAND STEM
•
Observing the indicated sequence, ex-
tract and remove the dust guard (1),
the seeger ring (2), the oil seal (3), the
ring (4), the guide bushing (5) and the
slider bushing (6).
•
- Insert the stem in the sleeve.
•
Using a suitable tool, complete with
striking hammer, insert oil seal into its
housing (3).
Specific tooling
AP8140189 Tool for fitting oil seal for 43 mm
(1.69 in) diameter hole
AP8140146 Weight
•
Position the seeger ring (2) inside the
sleeve.
SUSP - 202
V100 E5