MOTO GUZZI V100 E5 2023 Service Station Manual page 68

Maintenance
Once the oil has drained out, screw in and tighten
the drain plug with its washer to the prescribed
torque.
Remove metal residues attached to the drain plug
magnet.
NOTE
DURING REPLACEMENT, USE A NEW SEALING WASHER.
DO NOT DISPOSE OF OIL IN THE ENVIRONMENT.
DISPOSE OF ENGINE OIL IN A SEALED CONTAINER AND
TAKE IT TO YOUR SUPPLIER OR TO THE NEAREST USED
OIL COLLECTION CENTRE.
IT IS ADVISABLE TO WEAR LATEX GLOVES WHEN SERV-
ICING THE VEHICLE.
Locking torques (N*m)
Oil drainage plug
20 ± 2 Nm (14.75 ± 1.47 lb ft)
Fill with new oil through the filler cap.
CAUTION
DO NOT ADD ADDITIVES OR OTHER SUBSTANCES TO
THE FLUID. WHEN USING A FUNNEL OR ANY OTHER EL-
EMENT, MAKE SURE IT IS PERFECTLY CLEAN.
Recommended products
Engine oil 10W -50 Synthetic-based lubricant
for high performance four-stroke engines.
SAE 10W 50; API SL; JASO MA2
Characteristic
Engine oil
Oil change and oil filter replacement: 4900 cc in
(299.02 cu in)
Screw and tighten the filler cap with its washer to
the prescribed torque.
NOTE
DURING REPLACEMENT, USE A NEW SEALING WASHER.
Locking torques (N*m)
Oil load cap
2 ± 0.5 Nm (1.47 ± 0.37 lb ft)
MAIN - 68
V100 E5