V100 E5
Battery
Function
Provides electrical power to vehicle.
Level in electrical circuit diagram:
Charging the battery
Position:
•
on the vehicle: under the rider saddle
•
connector: on the battery
Electrical specifications:12 V / 18 Ah
Pin out:
1. Positive pole (red): approx. 12.6 V
2. negative pole (black): ground
DIAGNOSTIC TOOL:PARAMETERS
Battery voltage
•
Example value with key ON: 12.0 V
•
Example value with engine on: 14.2 V
This is one of the values set by the ECU in the
event of recovery mode
Battery voltage before prior to Recovery mode
•
Example value with key ON: 12.0 V
•
Example value with engine on: 14.2 V
Value determined from signal read without taking
considering whether recovery mode is implemen-
ted
CAUTION
Do not leave the vehicle with the engine off and the ignition
key to "ON". The sophisticated on-board instruments have
a high current draw which, if left on with the engine switch-
ed off, will discharge the battery in a short time.
Electrical system
ELE SYS - 133