MOTO GUZZI V100 E5 2023 Service Station Manual page 186

Suspensions
INSTALLATION
•
Follow the removal procedure in re-
verse order; be careful to tighten the
retainers to the specified tightening tor-
ques.
NOTE
DURING REFITTING, INSERT THE FORK STANCHIONS IN
THE STEERING PLATES SO AS TO OBTAIN 12 mm BE-
TWEEN THE UPPER STEERING PLATE AND THE UPPER
EDGE OF THE FORK STANCHION (MEASURED UNDER
THE SLEEVE CAP).
Draining oil
V100 Mandello S
NOTE
THE FOLLOWING OPERATIONS ARE FOR OHLINS FORKS WITH ELECTRONIC ADJUSTMENTS.
•
Set the pre-loading spring to the mini-
mum position.
•
Unscrew the upper cap from the sleeve
using a specific Öhlins tool.
Specific tooling
01761-04 Ohlins fork cap ring nut
SUSP - 186
V100 E5