MOTO GUZZI V100 E5 2023 Service Station Manual page 240

Chassis
•
Remove the right-hand brake disc (10).
•
Working on the opposite side, unscrew
the six fixing screws (11) and remove
the left-hand brake disc (12).
REMOVAL OF INTERNAL WHEEL COMPO-
NENTS
•
Remove the dust guard (13).
Remove the bearing using a generic extractor,
proceeding as follows:
•
Insert the collar (A) into the bearing,
and screw the pin (B) into the bearing
until the collar is securely fastened to
the bearing.
•
Insert the thrust bushing (C) and nut
(D) onto the collar (A).
•
Hold the collar (A) while tightening the
nut (D) to push the bearing out of its
seat.
NOTE
CHAS - 240
V100 E5