V100 E5
•
Reinsert the ABS sensor (4) in its seat
and tighten the fixing screw.
•
Fit the brake calliper (2) on the brake
disc and tighten the fixing screws (1) to
the prescribed torque.
•
Repeat for the brake calliper on the op-
posite side.
Locking torques (N*m)
Brake calliper fixing screw
lbf ft)
•
Refit the plastic clamp (3) and reposi-
tion the ABS cable in the four retainers
on the brake pipe.
•
Perform several rotations to check that
the wheel moves freely and smoothly.
•
Refit the front mudguard.
•
Remove the pantograph jack and the
rear stand.
50 ± 5 Nm (36.88 ± 3.69
Chassis
CHAS - 245