MOTO GUZZI V100 E5 2023 Service Station Manual page 118

Electrical system
MEANS IT HAS TO BE REPEATED. IN THIS CASE, REPEAT
THE PROCEDURE WITH THE SIDE STAND CLOSED AND
VEHICLE IN NEUTRAL ALWAYS PAYING EXTREME AT-
TENTION. FOR MORE SAFETY, POSSIBLY BLOCK THE
VEHICLE AGAINST A WALL.
CAUTION
PROGRAMMING OF THE TONE WHEEL TAKES PLACE
DURING THE RELEASE PHASE OF THE THROTTLE
(FROM 7000 rpm TO IDLE RPM). IN THIS DESCENDING
PHASE THE THROTTLE GRIP MUST REMAIN COMPLETE-
LY CLOSED.
ASC CONTROL UNIT (ELECTRONIC SUSPENSION CONTROL UNIT)
(if applicable)
ASC CONTROL UNIT - Diagnosis
Function
It manages the ASC system, the system safety checks and the self-diagnosis function.
Level in electrical circuit diagram:
ASC Control Unit
Position:
•
on the vehicle: at the front, connected to the instrument cluster mount.
•
connector: on 34 PIN connector control unit (24 of which are active)
Pin out:See CONNECTORS paragraph
DIAGNOSTIC TOOL:INFO
(screen page/example values with key ON)
•
Hardware version / - (indicates the hardware version)
•
BOOT version / -
•
Software version / -
•
Map identification / -
DIAGNOSTIC TOOL:ACTIVATIONS
•
Suspension test - Softest setting - min damping / Minimum damping preload check
•
Suspension test - Hardest setting - max damping / Maximum damping preload check
DIAGNOSTIC TOOL: ERRORS
Code
D08600
D08601
D08602
D08603
D08604
D08605
D08606
D08607
D08608
D08609
D0860A
D0860B
ELE SYS - 118
ASC
ELECTRONIC SUSPENSION
Description / Symptoms
Invalid X-axis acceleration sensor signal
Invalid Y-axis acceleration sensor signal
Invalid Z-axis acceleration sensor signal
Invalid WX angular value sensor signal
Invalid WY angular value sensor signal
Invalid WZ angular value sensor signal
Invalid front wheel speed sensor signal
Invalid rear wheel speed sensor signal
Invalid front brake pressure sensor signal
Invalid rear brake pressure sensor signal
Invalid accelerator sensor signal
Invalid bank angle sensor signal
ECU
ERROR
V100 E5