MOTO GUZZI V100 E5 2023 Service Station Manual page 147

V100 E5
Side stand sensor
Function
indicates to the control unit the position of the side
stand
Operation / Operating principle
If the gear is engaged and the side stand is unfol-
ded, and therefore the circuit is open, the control
unit does not enable vehicle start-up or shuts off
the engine if it is rotating
Level in electrical circuit diagram:
Start enable switches
Position:
•
sensor: on the stand support, under the
rider's left footrest
Stand pin out (1):
1. Fuel system
2. Output A
3. Ground
4. Output B
Electrical specifications:
•
Stand up: closed circuit (continuity)
•
Stand down: open circuit (infinite re-
sistance)
Electrical system
ELE SYS - 147